Jump to content

Covellite

From Wikipedia, the free encyclopedia
Covellite
General
CategorySulfide mineral
Formula
(repeating unit)
CuS (copper monosulfide)
IMA symbolCv[1]
Strunz classification2.CA.05a
Dana classification02.08.12.01
Crystal systemHexagonal
Crystal classDihexagonal dipyramidal (6/mmm)
H–M Symbol (6/m 2/m 2/m)
Space groupP63/mmc
Unit cella = 3.7938 Å, c = 16.341 Å; Z = 6
Identification
ColorIndigo-blue or darker, commonly highly iridescent, brass-yellow to deep red
Crystal habitThin platy hexagonal crystals and rosettes also massive to granular.
CleavagePerfect on {0001}
TenacityFlexible
Mohs scale hardness1.5–2
LusterSubmetallic, inclining to resinous to dull
StreakLead gray
DiaphaneityOpaque
Specific gravity4.6–4.8
Optical propertiesUniaxial (+)
Refractive indexnω = 1.450 nε = 2.620
PleochroismMarked, deep blue to pale blue
Fusibility2.5
Other characteristicsMicaceous cleavage
References[2][3][4]
Covellite (gray) replacing and embaying chalcopyrite (light), polished section from Horn Silver Mine, San Francisco Mining District, Utah. Enlarged to 210 diameters.

Covellite (also known as covelline) is a rare copper sulfide mineral with the formula CuS.[4] This indigo blue mineral is commonly a secondary mineral in limited abundance and although it is not an important ore of copper itself, it is well known to mineral collectors.[4]

The mineral is generally found in zones of secondary enrichment (supergene) of copper sulfide deposits. Commonly found as coatings on chalcocite, chalcopyrite, bornite, enargite, pyrite, and other sulfides, it often occurs as pseudomorphic replacements of other minerals.[5] The first records are from Mount Vesuvius, formally named in 1832 after N. Covelli.[4]

Composition

[edit]

Covellite belongs to the binary copper sulfides group, which has the formula CuxSy and can have a wide-ranging copper/sulfur ratio, from 1:2 to 2:1 (Cu/S). However, this series is by no means continuous and the homogeneity range of covellite CuS is narrow. Materials rich in sulfur CuSx where x~ 1.1- 1.2 do exist, but they exhibit "superstructures", a modulation of the hexagonal ground plane of the structure spanning a number of adjacent unit cells.[6] This indicates that several of covellite's special properties are the result of molecular structure at this level.

As described for copper monosulfide, the assignment of formal oxidation states to the atoms that constitute covellite is deceptive.[7] The formula might seem to suggest the description Cu2+, S2−. In fact the atomic structure shows that copper and sulfur each adopt two different geometries. However photoelectron spectroscopy, magnetic, and electrical properties all indicate the absence of Cu2+ (d9) ions.[7] In contrast to the oxide CuO, the material is not a magnetic semiconductor but a metallic conductor with weak Pauli-paramagnetism.[8] Thus, the mineral is better described as consisting of Cu+ and S rather than Cu2+ and S2−. Compared to pyrite with a non-closed shell of S pairing to form S22−, there are only 2/3 of the sulfur atoms held.[7] The other 1/3 remains unpaired and together with Cu atoms forms hexagonal layers reminiscent of the boron nitride (graphite structure).[7] Thus, a description Cu+3SS22− would seem appropriate with a delocalized hole in the valence band leading to metallic conductivity. Subsequent band structure calculations indicate however that the hole is more localized on the sulfur pairs than on the unpaired sulfur. This means that Cu+3S2−S2 with a mixed sulfur oxidation state -2 and -1/2 is more appropriate. Despite the extended formula of Cu+3S2−S2 from researchers in 1976 and 1993, others have come up with variations, such as Cu+4Cu2+2(S2)2S2.[9][10]

Structure

[edit]

For a copper sulfide, covellite has a complicated lamellar structure, with alternating layers of CuS and Cu2S2 with copper atoms of trigonal planar (uncommon) and tetrahedral coordination respectively.[10] The layers are connected by S-S bonds (based on Van der Waals forces) known as S2 dimers.[10] The Cu2S2 layers only has one l/3 bond along the c-axis (perpendicular to layers), thus only one bond in that direction to create a perfect cleavage {0001}.[7] The conductivity is greater across layers due to the partially filled 3p orbitals, facilitating electron mobility.[10]

Formation

[edit]
A microscopic picture of covellite

Naturally occurring

[edit]

Covellite is commonly found as a secondary copper mineral in deposits. Covellite is known to form in weathering environments in surficial deposits where copper is the primary sulfide.[11] As a primary mineral, the formation of covellite is restricted to hydrothermal conditions, thus rarely found as such in copper ore deposits or as a volcanic sublimate.[8]

Synthetic

[edit]

Covellite's unique crystal structure is related to its complex oxidative formation conditions, as seen when attempting to synthesize covellite.[12][13] Its formation also depends on the state and history of the associated sulfides it was derived from. Experimental evidence shows ammonium metavanadate (NH4VO3) to be a potentially important catalyst for covellite's solid state transformation from other copper sulfides.[13] Researchers discovered that covellite can also be produced in the lab under anaerobic conditions by sulfate reducing bacteria at a variety of temperatures.[14] However, further research remains, because although the abundance of covellite may be high, the growth of its crystal size is actually inhibited by physical constraints of the bacteria.[14] It has been experimentally demonstrated that the presence of ammonium vanadates is important in the solid state transformation of other copper sulfides to covellite crystals.[12]

Occurrence

[edit]
Covellite from the Black Forest, Germany

Covellite's occurrence is widespread around the world, with a significant number of localities in Central Europe, China, Australia, Western United States, and Argentina.[4] Many are found close to orogenic belts, where orographic precipitation often plays a role in weathering. An example of primary mineral formation is in hydrothermal veins at depths of 1,150 m found in Silver Bow County, Montana.[4] As a secondary mineral, covellite also forms as descending surface water in the supergene enrichment zone oxidizes and redeposits covellite on hypogene sulfides (pyrite and chalcopyrite) at the same locality.[4] An unusual occurrence of covellite was found replacing organic debris in the red beds of New Mexico.[15]

Nicola Covelli (1790-1829), the discoverer of the mineral, was a professor of botany and chemistry though was interested in geology and volcanology, particularly Mount Vesuvius' eruptions.[4] His studies of its lava led to the discovery of several unknown minerals including covellite.[4]

Applications

[edit]

Superconductors

[edit]

Covellite was the first identified naturally occurring superconductor.[16] The framework of CuS3 /CuS2 allow for an electron excess that facilitate superconduction during particular states, with exceptionally low thermal loss. Material science is now aware of several of covellite's favorable properties and several researchers are intent on synthesizing covellite.[17][18] Uses of covellite CuS superconductivity research can be seen in lithium batteriescathodes, ammonium gas sensors, and solar electric devices with metal chalcogenide thin films.[19][20][21]

Lithium ion batteries

[edit]

Research into alternate cathode material for lithium batteries often examines the complex variations in stoichiometry and tetrahedron layered structure of copper sulfides.[22] Advantages include limited toxicity and low costs.[23] The high electrical conductivity of covellite (10−3 S cm−1) and a high theoretical capacity (560 mAh g−1) with flat discharge curves when cycled versus Li+/Li has been determined to play critical roles for capacity.[23] The variety of methods of formations is also a factor of the low costs. However, issues with cycle stability and kinetics have been limiting the progress of utilizing covellite in mainstream lithium batteries until future developments in its research.[23]

Nanostructures

[edit]

The electron mobility and free hole density characteristics of covellite makes it an attractive choice for nanoplatelets and nanocrystals because they provide the structures the ability to vary in size.[24][25] However, this ability can be limited by the plate-like structure all copper sulfides possess.[24] Its anisotropic electrical conductivity has been experimentally proven to be greater within layers (i.e. perpendicular to c-axis).[24] Researchers have shown that covellite nanoplatelets of approx. two nm thick, with one unit cell and two copper atoms layers, and diameters around 100 nm are ideal dimensions for electrocatalysts in oxygen reduction reactions (ORR).[24] The basal planes experience preferential oxygen adsorption and larger surface area facilitates electron transfer.[24] In contrast, with ambient conditions, nanoplatelets of dimensions of four nm width and greater than 30 nm diameter have been experimentally synthesized with less cost and energy.[25] Conversely, localized surface plasmon resonances observed in covellite nanoparticles have recently been linked to the stoichiometry-dependent band gap key for nanocrystals.[26][27] Thus, future chemical sensing devices, electronics, and others instruments are being explored with the use of nanostructures with covellite CuS.[24][26]

See also

[edit]

References

[edit]
  1. ^ Warr, L.N. (2021). "IMA–CNMNC approved mineral symbols". Mineralogical Magazine. 85 (3): 291–320. Bibcode:2021MinM...85..291W. doi:10.1180/mgm.2021.43. S2CID 235729616.
  2. ^ Handbook of Mineralogy
  3. ^ Webmineral data
  4. ^ a b c d e f g h i Mindat.org
  5. ^ Q. Ashton Acton (2012). Chlorine Compounds-Advances in Research and Application. ScholarlyMedia LLC. ISBN 9781481600040. OCLC 1024280169.
  6. ^ Putnis, A.; Grace, J.; Cameron, W. E. (1977). "Blaubleibender covellite and its relationship to normal covellite". Contributions to Mineralogy and Petrology. 60 (2): 209–217. Bibcode:1977CoMP...60..209P. doi:10.1007/bf00372282. ISSN 0010-7999. S2CID 95661500.
  7. ^ a b c d e Evans, Howard T.; Konnert, Judith A. (1976). "Crystal structure refinement of covellite". American Mineralogist. 61: 996–1000.
  8. ^ a b Warner, Terence E. (2013). Synthesis, properties and mineralogy of important inorganic materials. Wiley. ISBN 9780470976234. OCLC 865009780.
  9. ^ Goble, Ronald J. (1985). The relationship between crystal structure, bonding and cell dimensions in the copper sulfides : supplementary unpublished material. OCLC 45557917.
  10. ^ a b c d Liang, W.; Whangbo, M.-H. (February 1993). "Conductivity anisotropy and structural phase transition in Covellite CuS". Solid State Communications. 85 (5): 405–408. Bibcode:1993SSCom..85..405L. doi:10.1016/0038-1098(93)90689-k. ISSN 0038-1098.
  11. ^ Majzlan, Juraj; Kiefer, Stefan; Herrmann, Julia; Števko, Martin; Sejkora, Jiří; Chovan, Martin; Lánczos, Tomáš; Lazarov, Marina; Gerdes, Axel (June 2018). "Synergies in elemental mobility during weathering of tetrahedrite [(Cu,Fe,Zn)12(Sb,As)4S13]: Field observations, electron microscopy, isotopes of Cu, C, O, radiometric dating, and water geochemistry". Chemical Geology. 488: 1–20. Bibcode:2018ChGeo.488....1M. doi:10.1016/j.chemgeo.2018.04.021. ISSN 0009-2541. S2CID 135253715.
  12. ^ a b Simonescu, C.M., Teodorescu, V.S., Carp, O., Patron, L. and Capatina, C. (2007). "Thermal behaviour of CuS (covellite) obtained from copper–thiosulfate system". Journal of Thermal Analysis and Calorimetry. 88 (1): 71–76. doi:10.1007/s10973-006-8079-z. S2CID 94104147.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  13. ^ a b Ghezelbash, Ali; Korgel, Brian A. (October 2005). "Nickel Sulfide and Copper Sulfide Nanocrystal Synthesis and Polymorphism". Langmuir. 21 (21): 9451–9456. doi:10.1021/la051196p. ISSN 0743-7463. PMID 16207021.
  14. ^ a b Gramp, J.P.; Sasaki, K.; Bigham, J.M.; Karnachuck, O.V.; Tuovinen, O.H. (2006). "Formation of Covellite (CuS) Under Biological Sulfate-Reducing Conditions". Geomicrobiology Journal. 23 (8): 613–619. doi:10.1080/01490450600964383. S2CID 95152748.
  15. ^ Emmons, W. H., The Enrichment of Ore Deposits, Bulletin 625, United States Geological Survey, 1917, p. 193
  16. ^ Benedetto, F.D.; Borgheresi, M.; Caneschi, A.; Chastanet, G.; Cipriani, C.; Gatteschi, D.; Pratesi, G.; Romanelli, M.; Sessoli, R. (2006). "First evidence of natural superconductivity". European Journal of Mineralogy. 18 (3): 283–287. Bibcode:2006EJMin..18..283D. doi:10.1127/0935-1221/2006/0018-0283.
  17. ^ Chunyan Wu; Shu-Hong Yu; Markus Antoniette (2006). "Complex Concaved Cuboctahedrons of Copper Sulfide Crystals with Highly Geometrical Symmetry Created by a Solution Process". Chemistry of Materials. 18 (16): 3599–3601. doi:10.1021/cm060956u.
  18. ^ Nava, Dora; Gonzalez, I; et al. (2006). "Electrochemical characterization of chemical species formed during the electrochemical treatment of chalcopyrite in sulfuric acid". Electrochimica Acta. 51 (25): 5295–5303. doi:10.1016/j.electacta.2006.02.005.
  19. ^ Chung, J.-S.; Sohn, H.-J. (June 2002). "Electrochemical behaviors of CuS as a cathode material for lithium secondary batteries". Journal of Power Sources. 108 (1–2): 226–231. Bibcode:2002JPS...108..226C. doi:10.1016/s0378-7753(02)00024-1. ISSN 0378-7753.
  20. ^ Sagade, Abhay A.; Sharma, Ramphal (July 2008). "Copper sulphide (CuxS) as an ammonia gas sensor working at room temperature". Sensors and Actuators B: Chemical. 133 (1): 135–143. doi:10.1016/j.snb.2008.02.015. ISSN 0925-4005.
  21. ^ Mane, R. S.; Lokhande, C. D. (2010-06-03). "ChemInform Abstract: Chemical Deposition Method for Metal Chalcogenide Thin Films". ChemInform. 31 (34): no. doi:10.1002/chin.200034236. ISSN 0931-7597.
  22. ^ Foley, Sarah; Geaney, Hugh; Bree, Gerard; Stokes, Killian; Connolly, Sinead; Zaworotko, Michael J.; Ryan, Kevin M. (2018-03-24). "Copper Sulfide (Cu x S) Nanowire‐in‐Carbon Composites Formed from Direct Sulfurization of the Metal‐Organic Framework HKUST‐1 and Their Use as Li‐Ion Battery Cathodes". Advanced Functional Materials. 28 (19): 1800587. doi:10.1002/adfm.201800587. ISSN 1616-301X. S2CID 104176144.
  23. ^ a b c Zhou, Mingjiong; Peng, Na; Liu, Zhen; Xi, Yun; He, Huiqiu; Xia, Yonggao; Liu, Zhaoping; Okada, Shigeto (February 2016). "Synthesis of sub-10 nm copper sulphide rods as high-performance anode for long-cycle life Li-ion batteries". Journal of Power Sources. 306: 408–412. Bibcode:2016JPS...306..408Z. doi:10.1016/j.jpowsour.2015.12.048. ISSN 0378-7753.
  24. ^ a b c d e f Liu, Yang; Zhang, Hanguang; Behara, Pavan Kumar; Wang, Xiaoyu; Zhu, Dewei; Ding, Shuo; Ganesh, Sai Prasad; Dupuis, Michel; Wu, Gang (2018-11-19). "Synthesis and Anisotropic Electrocatalytic Activity of Covellite Nanoplatelets with Fixed Thickness and Tunable Diameter". ACS Applied Materials & Interfaces. 10 (49): 42417–42426. doi:10.1021/acsami.8b15895. ISSN 1944-8244. PMID 30451490. S2CID 206495105.
  25. ^ a b Liu, Maixian; Xue, Xiaozheng; Ghosh, Chayanjit; Liu, Xin; Liu, Yang; Furlani, Edward P.; Swihart, Mark T.; Prasad, Paras N. (2015-04-03). "Room-Temperature Synthesis of Covellite Nanoplatelets with Broadly Tunable Localized Surface Plasmon Resonance". Chemistry of Materials. 27 (7): 2584–2590. doi:10.1021/acs.chemmater.5b00270. ISSN 0897-4756.
  26. ^ a b Xie, Yi; Riedinger, Andreas; Prato, Mirko; Casu, Alberto; Genovese, Alessandro; Guardia, Pablo; Sottini, Silvia; Sangregorio, Claudio; Miszta, Karol (2013-11-06). "Copper Sulfide Nanocrystals with Tunable Composition by Reduction of Covellite Nanocrystals with Cu+ Ions". Journal of the American Chemical Society. 135 (46): 17630–17637. doi:10.1021/ja409754v. ISSN 0002-7863. PMID 24128337.
  27. ^ Xie, Yi; Bertoni, Giovanni; Riedinger, Andreas; Sathya, Ayyappan; Prato, Mirko; Marras, Sergio; Tu, Renyong; Pellegrino, Teresa; Manna, Liberato (2015-10-29). "Nanoscale Transformations in Covellite (CuS) Nanocrystals in the Presence of Divalent Metal Cations in a Mild Reducing Environment". Chemistry of Materials. 27 (21): 7531–7537. doi:10.1021/acs.chemmater.5b03892. ISSN 0897-4756. PMC 4652895. PMID 26617434.